Basic Equipment
Clamping system | Integral movement mold open-closing system with double station |
Extrusion System | Compound screw, L/D=24/1, Inverter harden gear surface decelerator |
Die system | Side way double bestrow and single cylinder material-center-incoming accumulator head |
Hydraulic system | Proportional control, Japan YUKEN for hydraulic value, Imported pump from Europe |
Electronic Control system | Special closed-loop control system imported from Europe |
Blowing Device | Multi-function automatic bottom-blowing system |
Parameters
Specifications | ||
Material | PE,PP, ABS … | |
Max container capacity | L | 30 |
Output(dry cycle) | Pc/hr | Depend on actual products & productive condition |
Machine Dimension(LxWxH) | M | 6.4x6.2x4 |
Total weight | T | 23 |
Clamping Unit | ||
Clamping force | KN | 200 |
Platen opening stroke | mm | 400-850 |
Platen size | mm | 830x800 |
Max mould size(WxH) | mm | 590x700 |
Mould thickness | mm | 410-470 |
Power | ||
Max drive | KW | 107 |
Air pressure | MPA | 1.0 |
Air consumption | M3/min | 1.2 |
Average energy consumption | KW | 63 |
Extruder Unit | ||
Screw diameter | mm | 100 |
Screw L/D ratio | L/D | 24 |
Melting capacity | Kg/hr | 160 |
Number of heating zone | zone | 5 |
Extruder heating power | KW | 28 |
Extruder driving power | KW | 55 |
Accumulator head | ||
Number of die | Set | 1 |
Number of heating zone | zone | 4 |
Power of die heating | KW | 19 |
Max die-pin diameter | mm | 250 |
Accumulator capacity | L | 5 |
dd
PRODUCT CATEGORY
Single Station Automatic
- PXB70D Series
- PXB70 Series
- PXB90D Series
- PXB90 Series
- PXB110 Series
- PXB200L Series
- 5ml-2L Single Station PXB50
- 2L-5L Single Station PXB65
- 5L-12L Single Station PXB70
- 20L-30L Single Station PXB80
- 30L-60L Single Station PXB90
- 60L-90L Single Station PXB100
- 60L-120 L Single Station PXB...
- 120 L-160L Single Station PX...
- 460L-500L Single Station PXB...
- 200L-220L Single Station PXB...
Double Station Automatic
Parts